Redwood was drained swamp and farmland until the late 1950s, when rural sections began to be subdivided for houses. It grew rapidly from the 1970s, and further subdivisions followed in the 2000s with Regent's Park in the north-west and Redwood Springs in the north-east. If your cylinder has failed, we can usually have hot water back on in Redwood within a day. If it is still working but showing its age, we can plan the swap at a time that suits you.
Redwood cylinder replacements for 1970s homes and Regent's Park subdivisions
Redwood grew quickly from the 1970s on drained swamp and farmland, and those houses are now on their second or third cylinder. Typical setups from that decade have the cylinder in a central hallway cupboard with copper pipe, and plenty still run low pressure. Copper of this age often copes with mains pressure once it has been inspected, though older soldered joints and fittings deserve a close look before the change.
The 2000s subdivisions at Regent's Park and Redwood Springs are a different job. Those homes generally went in with mains pressure cylinders, frequently in the garage, and many have now passed the 10 to 15 year life that Consumer NZ suggests. A swap there is usually like for like, with new valves, a check that the drain lines discharge clear of the garage floor and restraint updated to current practice.
Frost on the flat land near the Styx River can freeze a relief drain where it leaves an outside wall. In garage installs we lag the pipe runs, and in the older homes we check the underfloor pipework while we are there. If you are weighing up a heat pump water heater instead, we explain how its outdoor unit performs on frosty mornings before you choose. Garages in Regent's Park and Redwood Springs often double as storage, so we make sure the valves and drain stay reachable after the new cylinder goes in.
Local tip: In a Regent's Park or Redwood Springs garage, keep stored items clear of the cylinder valves so they can discharge freely and be reached quickly.
Hot Water Cylinders in Redwood: Local Factors
Homes from the 1970s and 1980s often have low pressure cylinders and copper pipework. Replacing the cylinder is a good time to look at mains pressure and the condition of the pipes.
For anything else, see our plumbers in Redwood.
How We Handle Hot Water Cylinders in Redwood
We carry common cylinder sizes and valves, so most replacements in Redwood are done in a day once you have approved the quote.
Pricing: quotes are free, and every job gets a fixed price before we start, so there are no surprises on the invoice.
Hot Water Cylinders Jobs We Do in Redwood
- Cylinder valve replacement
- Leaking cylinder
- Electric cylinder replacement
- LPG water heater replacement
- Safe tray install
Hot Water Cylinders Redwood FAQs
Our Redwood house was built in the 2000s. Is the cylinder due for replacement?
Not just because of its age. If the tank is leaking, the water is discoloured or it keeps running out, it may be time; otherwise new valves may be enough. We check and advise.
What size cylinder do I need?
It depends on how many people live in the house and how you use hot water. We size it with you so you do not run out.
How much does a new hot water cylinder cost in Redwood?
It depends on the size, type and access. We give you a fixed price after a quick look.
Hot Water Cylinders Near Redwood
- Hot Water Cylinders Papanui
- Hot Water Cylinders Bishopdale
- Hot Water Cylinders Belfast
- Hot Water Cylinders Northwood
- Hot Water Cylinders across Christchurch